|
Product Details:
Payment & Shipping Terms:
|
| Name: | Pneumatic Diaphragm Pump | Maximum Outlet Pressure: | 0.83mpa |
|---|---|---|---|
| Feature: | Explosion Proof | Application: | Granular Liquids |
| Size: | 3 Inch | Usage: | Corrosive Liquids |
| Highlight: | pneumatic operated diaphragm pump,pneumatic air pump |
||
Explosion Proof Pneumatic Diaphragm Pump For Corrosive Liquids , Granular Liquids
Pneumatic Diaphragm Pump Introduction
pneumatic diaphragm pump is a new type of pump developed in China.Using compressed air as the power source, all kinds of corrosive liquids, granular liquids, high viscosity, volatile, inflammable, highly toxic liquids can be exhausted by light absorption.
Corrosion resistance high temperature resistance high pressure strong suction easy installation,No noise, no sparks.
Pneumatic Diaphragm Pump Parameters
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.83 |
| 2 | Maximum flow rate | L/Min | 903 |
| 3 | Maximum lift | M | 70 |
| 4 | Maximum outlet pressure | Mpa | 0.83 |
| 5 | Maximum particle size | mm | 9 |
| 6 | Weight | kg | 103 |
| 7 | Noise level | db | ＜70 |
A 50 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar
Pneumatic Diaphragm Pump Details
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ··············································· 40°- 150°F (4.4- 65.5°C)
Santoprene··········································-40°- 225°F (-40°- 107.2°C) ················································ ·40°- 220°F (4.4°- 104°C) Nitrile·················································10°- 180°F (-12°- 82°C) Viton···················································-40°- 350°F (-40°-176.6°C) Hytrel··················································-20°-150°F (-12°- 93°C) Kynar···················································10°-200°F (-28.9°- 65.5°C) Polypropylene·········································32°- 175°F (0-79.4°C)
Requirements for Air and Lubrication
EXCESSIVE AIR PRESSURE. Can cause pump damage, personal injury or property damage.
Maintenance
Installation dimensions:
Contact Person: Mr. ALLSON
Tel: 008618122100289
