Product Details:
Payment & Shipping Terms:
|
High Light: | rubber diaphragm pump,submersible diaphragm pump |
---|
No-leakage Polypropylene Diaphragm Pump For Printing / Dyeing
Item | Description | Unit | Reference Figure |
1 | Maximum air inlet pressure | Mpa | 0.83 |
2 | Maximum flow rate | 1/Min | 192 |
3 | Maximum lift | M | 70 |
4 | Maximum outlet pressure | Mpa | 0.83 |
5 | Maximum particle size | mm | 3 |
6 | Weight | kg | 12.3 |
7 | Noise level | db | <70 |
Air diaphragm pump(also know as a Membrane pump, air operated double diaphragm pump(AOOD) or pneumatic diaphragm pump)that uses a combination of the reciprocating action of a rubber,thermoplastic or diaphragm and suitable valves either side of the diaphragm (check valve,butterfly valves,flap valves,or any other form of shut-off valves) to pump a fluid.
Product Features
1 , where the pump parts in contact with the transport of materials are made of stainless steel sanitary standards , which are made of non-toxic rubber seals . Reliable and non-toxic rust sealing ensures the safety and health.
2 , the rotor and the rotor chamber flow line structure no dead spots and non-metallic parts, to avoid the material being transported pollution.
3 , suitable for CIP cleaning and steam sterilization in place , in full compliance with U.S. FDA regulatory requirements and pharmaceutical grade (GMP) specifications.
4 , especially for the transportation process re- foaming and easily transfer high viscosity, and any media containing high concentrations of particles , through the delivery of materials to maintain the original quality department changed , can not afford any chemical reaction .
5 , the use of exterior dynamic and static ring mechanical seal , can direct water rinse , high pressure , easy to wear , no leaks .
6 , small size , flow, high head pressure for long distance and high resistance transport .
7 , the pump impeller and transmission gear separated from the pump chamber and between the various parts to guarantee a certain gap , not in contact with each other , Wu wear, low noise, high reliability , long life, energy saving.
8 , after configuring the drive , you can freely adjust the flow , and metering pumps for general use .
9 , can transport gas, liquid, solid , such as three-phase hybrid materials.
10 , compact structure, easy maintenance, almost no wearing parts, low operating costs.
Specifications
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP
A 2 5 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ···············································40°- 150°F (4.4- 65.5°C)
Santoprene·········································-40°- 225°F (-40°- 107.2°C) ·················································40°- 220°F (4.4°- 104°C) Nitrile··················································10°- 180°F (-12°- 82°C) Viton···················································-40°- 350°F (-40°-176.6°C) Hytrel···················································-20°-150°F (-12°- 93°C) Kynar···················································10°-200°F (-28.9°- 65.5°C) Polypropylene·········································32°- 175°F (0-79.4°C)
1” Flow diagram
Installation dimensions:
Contact Person: Mr. ALLSON
Tel: 008618122100289