|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Industrial Diaphragm Pump Air Driven | Application: | Pigment And Textile Chemical Industry |
|---|---|---|---|
| Noise Level: | ＜70db | Weight: | 28kg |
| High Light: | air actuated diaphragm pump,compressed air diaphragm pump |
||
Aluminium Alloy Industrial Diaphragm Pump Air Driven 600L/Min
Air diaphragm pump(also know as a Membrane pump, air operated double diaphragm pump(AOOD) or pneumatic diaphragm pump)that uses a combination of the reciprocating action of a rubber,thermoplastic or diaphragm and suitable valves either side of the diaphragm (check valve,butterfly valves,flap valves,or any other form of shut-off valves) to pump a fluid.
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.83 |
| 2 | Maximum flow rate | L/Min | 667 |
| 3 | Maximum lift | M | 70 |
| 4 | Maximum outlet pressure | Mpa | 0.83 |
| 5 | Maximum particle size | mm | 7 |
| 6 | Weight | kg | 28 |
| 7 | Noise level | db | ＜70 |
Application area:
Chemical Industry; Coating Industry; Painting Industry; Dye Industry; Pigment and Textile Chemical Industry; Food Industry; Water treatment Industry; Petroleum Industry; Environmental protection Industry; Pharmaceutical Industry
Pneumatic Diaphragm Pump Advantages:
1. Explosion-proof, zero leak, simple operation.
2. Idling capability,Self suction, No complex control.
3. Diversity of material,no rotating parts,applicable to various erosive situations.
4. Diaphragm, ball and ball seat adopt imported materials with longer service life.
5. Modularization of main valve and air motor. No broken, easy to disassemble and repai
Specifications
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP
A 50 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ··········································40°- 150°F (4.4- 65.5°C)
Santoprene·····································-40°- 225°F (-40°- 107.2°C) ···········································40°- 220°F (4.4°- 104°C)
Nitrile···········································10°- 180°F (-12°- 82°C)
Viton·············································-40°- 350°F (-40°-176.6°C)
Hytrel············································-20°-150°F (-12°- 93°C) Kynar···········································10°-200°F (-28.9°- 65.5°C) Polypropylene································32°- 175°F (0-79.4°C)
2” Flow diagram
Contact Person: Mr. ALLSON
Tel: 008618122100289
