Micro Chemical 3 Inch Air Diaphragm Pump 903l/Min For Waste Water Treatment

 Micro 1.5" Inch Pneumatic Diaphragm Pump No Leakage for Chemical
 
Pneumatic Diaphragm Pump description
 

1, No electricity. It's safe and reliable while in the flammable and explore places.

2, Pump has no rotary parts and bearing seals. The diaphragm will completely separate the exhausted medium and pump running parts, working medium. There's no leakage, thus it doesn't cause environmental pollution and human body safety dangerous while exhausting the toxin and flammable or corrosive medium.

3,  It's convenient to use and reliable to work. This pump is simple in structure and easy to be installed and maintained.

The medium conveyed doesn't touch the matched pneumatic valve and coupling lever etc. While normal pumps' performance will be decreased gradually because of the damages of driving parts.

4, This pump doesn't need oil lubricant, even works in dry run.

 
Air diaphragm pump(also know as a Membrane pump, air operated double diaphragm pump(AOOD) or pneumatic diaphragm pump)that uses a combination of the reciprocating action of a rubber,thermoplastic or diaphragm and suitable valves either side of the diaphragm (check valve,butterfly valves,flap valves,or any other form of shut-off valves) to pump a fluid.
 

 
Pneumatic Diaphragm Pump Specifications
 
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP
 
Pneumatic Diaphragm Pump Application:
It is widely applied in waste water treatment, chemical industry, petrochemical industry, painting, ceramics, environmental protection, printing and dyeing, etc. to deal with all kinds of corrosive, volatile, flammable, poisonous fluids with particles and high viscosity.
 
BG40 AL - X X-X X - X X   (model selection)
 
Form of pipe mouth:A-BSP B-NPT(F) C-Flange  
Diaphragm material:9 – Santoprene H – Hytrel   T - PTFE/Santoprene  
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal  
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel  
Pump material: SS –Stainless Steel AL –Aluminum Alloy   CI- Carbon Steel P/K –Polypropylene/Kynoar
 
 
Maximum Applied Temperature Limits (diaphragm / ball / seal material)  
 
 
Acetal ···············································40°-         150°F        (4.4- 65.5°C)  
Santoprene·········································-40°- 225°F (-40°- 107.2°C)   ·················································40°- 220°F (4.4°- 104°C)   Nitrile··················································10°- 180°F (-12°- 82°C)   Viton···················································-40°- 350°F (-40°-176.6°C)   Hytrel··················································-20°-150°F (-12°- 93°C)   Kynar··················································10°-200°F (-28.9°- 65.5°C)   Polypropylene·······································32°- 175°F (0-79.4°C)
 
 
1.5" Flow diagram